Netopia r6100 Verweisanleitung
3-4 User’s Reference Guide
Netopia R6000 Series ADSL Router back panel ports
The following table describes all the Netopia R6000 Series ADSL Router back panel por ts.
Port
Description
Power por t
A mini-DIN8 power adapter cable connection.
Line por ts
Two telephone-style jacks labeled Line 1 and Line 2. Line 1 is for your ADSL
connection. If you have an R6120 or R6131 model, the Line 2 por t is for your
analog or ISDN dial backup connection.
connection. If you have an R6120 or R6131 model, the Line 2 por t is for your
analog or ISDN dial backup connection.
Console por t
A DB-9 console por t for a direct serial connection to the console screens. You
can use this if you are an experienced user. See
can use this if you are an experienced user. See
.
Auxiliar y por t
An HD-15 auxiliar y por t for attaching an external modem or the optional
AppleTalk kit.
AppleTalk kit.
Crossover switch
A crossover switch with Normal and Uplink positions. If you use Ethernet Por t
#1 for a direct Ethernet connection between a computer and the router, set the
switch to the Normal position. If you are connecting the router to an Ethernet
hub, use Ethernet por t #1 on the router and set the switch to the Uplink
position.
#1 for a direct Ethernet connection between a computer and the router, set the
switch to the Normal position. If you are connecting the router to an Ethernet
hub, use Ethernet por t #1 on the router and set the switch to the Uplink
position.
8-por t Ethernet hub
Eight Ethernet jacks. You will use one of these to configure the Netopia R6000
Series. For a new installation, use the Ethernet connection. Alternatively, you
can use the console connection to run console-based management using a
direct serial connection. You can either connect your computer directly to any of
the Ethernet por ts on the router, or connect both your computer and the router
to an existing Ethernet hub on your LAN.
Series. For a new installation, use the Ethernet connection. Alternatively, you
can use the console connection to run console-based management using a
direct serial connection. You can either connect your computer directly to any of
the Ethernet por ts on the router, or connect both your computer and the router
to an existing Ethernet hub on your LAN.