Netopia r6100 Verweisanleitung

■

A cold star t trap is generated after the router is reset.

■

An inter face down trap (ifDown) is generated when one of the router’s inter faces, such as a por t, stops 
functioning or is disabled.

■

An inter face up trap (ifUp) is generated when one of the router’s inter faces, such as a por t, begins 
functioning.

The Netopia R6000 Series sends traps using UDP (for IP networks). 

You can specify which SNMP managers are sent the IP traps generated by the Netopia R6000 Series. Up to 
eight receivers can be set. You can also review and remove IP traps.

To go to the IP Trap Receivers screen, select IP Trap Receivers. The IP Trap Receivers screen appears.

1.

Select Add IP Trap Receiver.

2.

Select Receiver IP Address or Domain Name. Enter the IP address or domain name of the SNMP manager 
you want to receive the trap.

3.

Select Community String if you enabled one in the SNMP Setup screen, and enter the appropriate 
password.

4.

Select Add Trap Receiver Now and press Return. You can add up to seven more receivers.

To display a view-only table of IP trap receivers, select Display/Change IP Trap Receiver in the IP Trap 
Receivers screen.

1.

To edit an IP trap receiver, select Display/Change IP Trap Receiver in the IP Trap Receivers screen.

                               IP Trap Receivers

                     Display/Change IP Trap Receiver...

                     Add IP Trap Receiver...

                     Delete IP Trap Receiver...

Return/Enter to modify an existing Trap Receiver.
Navigate from here to view, add, modify and delete IP Trap Receivers.