Quantum DAT 160 Anleitung Für Quick Setup
DAT 160 SCSI and USB
Tape Drives
Tape Drives
Tabletop and
Internal Tape Drive
Quick Start Guide
Important Information About
Your New Tape Drive
• Before installing the tape drive run the driver installer from the
CD-ROM.
• USB: Always connect to a USB 2.0 port (on a computer running
Windows or Linux).
• USB: The tape drive should be the only device on the USB hub.
• SCSI: Connect to an Ultra 160 SCSI HBA or higher
• SCSI: Use a SCSI cable and terminator
• For optimum performance use DAT 160 media cartridges
• SCSI: Connect to an Ultra 160 SCSI HBA or higher
• SCSI: Use a SCSI cable and terminator
• For optimum performance use DAT 160 media cartridges
(MR-D6MQN-xx)
NOTE:
The DAT 160 cartridge is larger than previous generations of
DAT cartridges.
Contents
English..................................................... 1
French.............................................on CD
German...........................................on CD
Spanish...........................................on CD
Korean ............................................on CD
Japanese .........................................on CD
Simplified Chinese .......................on CD
French.............................................on CD
German...........................................on CD
Spanish...........................................on CD
Korean ............................................on CD
Japanese .........................................on CD
Simplified Chinese .......................on CD
This quick start guide provides basic
installation instructions for your internal
or external Quantum DAT 160 Tape
Drive. For detailed instruction see the
Quantum DAT 160 Tape Drive User’s
Guide, p/n 81-81794-01 A01.