Quantum DAT 160 Betriebsanweisung
Chapter 2 Installing Internal Tape Drives
Install Drive
Quantum DAT 160 User’s Guide
13
1
Use a Torx screwdriver to attach the appropriate screws. You may
need to purchase the M3 screws separately. Position the screws (see
).
Figure 5 Attaching Mounting
Screws
Screws
2
Attach the appropriate mounting hardware. Refer to the
manufacturer’s documentation for instructions.
• If you are installing on a server that requires a tray, place the tape
• If you are installing on a server that requires a tray, place the tape
drive in the tray.
• If you are installing in a server that requires mounting rails,
fasten the rails to the tape drive.
• Some servers have snap-on mounting rails attached to the filler
panel. These can be removed and attached to the tape drive with
screws.
Install Drive
Slide the tape drive into the open bay aligning the tray or rails with the
slots in the bay (see