Quantum DAT 160 Betriebsanweisung
Chapter 3 Installing External Tape Drives
Connecting the SCSI Tape Drive
Quantum DAT 160 User’s Guide
26
Figure 16 Connecting Power
and USB Cables
and USB Cables
3
Plug the USB cable into the USB connector on the server.
Connecting the SCSI Tape Drive
Before You Begin
3
In addition to the contents included with your external tape drive, you
need the following items to install your external SCSI tape drive:
• A SCSI host bus adapter that is properly installed and configured in a
host computer
• Backup application software that supports the external tape drive.
For a list of the latest backup software applications tested with the
external DAT 160 tape drives, please visit our Web site at
www.quantum.com/support
.
Note:
It is important to ensure that you connect your drive to a
USB 2.0 port. The drive will work on a USB 1.1 port but
performance will be severely degraded.
USB cable
(pre-fitted)
(pre-fitted)
On/off switch
Power cable