Quantum DAT 160 Betriebsanweisung
24
Operation and Maintenance
p Press down gently while rocking the magazine from side-to-side until it snaps
into place. Remove the cover by pressing in on the middle of both ends (where it
is labeled PUSH ) and lifting upwards.
is labeled PUSH ) and lifting upwards.
Loading the Magazine
Once you have placed the magazine on the carriage, the DAT Autochanger must
initiate a loading process. During this procedure the DAT Autochanger checks and
maps the position of each cassette and makes sure that all cassettes are inserted into
the magazine correctly. If you are using the sequential access mode the DAT
Autochanger inserts the first cassette into the drive.
initiate a loading process. During this procedure the DAT Autochanger checks and
maps the position of each cassette and makes sure that all cassettes are inserted into
the magazine correctly. If you are using the sequential access mode the DAT
Autochanger inserts the first cassette into the drive.
p Make sure the magazine is placed correctly on the carriage.
p Close the door and press LOAD. The DAT Autochanger will initiate the loading
procedure.
Note
The door must be closed before the LOAD or UNLOAD functions will
activate.
activate.