Quantum DAT 160 Betriebsanweisung

27

p Remove the magazine by using two hands to grasp the magazine and pull up and

toward you.

p Store the magazine in a cool dry place.

When operated in random access mode, the software usually commands the DAT
Autochanger to unload a magazine (or individual cassette). The LOCKED LED is
intended to protect the system against unauthorized user intervention. When the
LOCKED LED is on, the DAT Autochanger ignores the

 LOAD and UNLOAD

buttons on the front panel. Use your system software to issue the UNLOAD
command.

If you wish to remove the magazine but there is a cassette in the drive, do the
following:

p Cycle power on the DAT Autochanger (turn the power switch off and then back

on after a few seconds have passed).

p Open the DAT Autochanger door.

p Press the eject button on the drive.

p It will take thirty seconds or more for the drive to eject the cassette.

p Close the door of the DAT Autochanger. Press the UNLOAD button to retrieve

the cassette and move the magazine to the unloaded position.

p Place the cover on the magazine and remove it as noted previously.

If for some reason you need to use a single cassette, you can load it manually (this
operation is the same as loading a cleaning cassette).