Quantum DLT-V4 Betriebsanweisung

Cartridge
Inspect the exterior of the 
cartridge for chips, cracks, 
dents or missing screws. 
Gently shake the cartridge, 
listening for rattles or 
loose pieces.

Visual Inspection

Visual

Inspection

www.quantum.com

Visual Inspection 

Media Care Guide

Cartridge Door
Ensure the door is moveable 
and springs closed.

Write Protection Switch
Move the switch. It should be
able to snap into write-protected 
mode and write-enabled mode.

End Sense Sensor
Make sure the sensor window
 is clean and not badly scratched.

 

Refer to your drive user’s guide for how, and when, 
to perform retensioning. 
Some of the following circumstances 
may require retensioning:
Make sure the media has acclimated to the local temperature 
before retensioning.
•  The cartridge is being used for the first time. 
•  The cartridge has been exposed to major temperature changes.  
•  The cartridge has not been used in some time (over a month).
•  The cartridge was dropped; assess the damage and either  
     retension or replace.

Tape Retensioning
NOTE: Travan data cartridges sometimes require periodic media 
retensioning to operate properly within your tape drive. 
Restoring proper tension ensures the drive head is making good 
contact with the tape media.