Quantum DLT VS160 Anleitung Für Quick Setup

This Quick Start Guide explains how 
to unpack, install, and operate your 
ValueLoader DLT VS80, ValueLoader 
DLT VS160, ValueLoader LTO-1, 
ValueLoader LTO-2, or ValueLoader 
SDLT 320 including how to correctly 
handle magazines and tape cartridges.

For additional information, visit 
www.Quantum.com, refer to the 
Quantum ValueLoader User’s Guide 
installed as a PDF (portable document 
for mat) file on the enclosed CD, or 
contact Quantum Technical Sup port 
and Customer Service by dialing 
(800)  284-5101.

Note:

 Adobe Acrobat Reader 

5.0 or later is required to view 
and print PDF documents. 
To download a free copy of 
Adobe Acrobat Reader, go to 
www.adobe.com.

a.

Look for markings on the shipping carton that indicate the top. If necessary, 
position the carton so that it is top-side up.

Using scissors, a utility knife, or other appropriate tool, carefully cut the packing 
tape along the length and ends of the carton.

Remove the accessories from the shipping carton and check the contents. The 
accessories include the following items:

SCSI cable and terminator

Regulatory insert and documentation

Power cord

If this is a rackmount installation, check the rack kit contents. The rack kit contains 
the following items:

Hardware kit with clip nuts and bolts

Mounting rails

Fixing flanges

Lift the ValueLoader and padding out of the box and place it on a work surface, top 
facing up.

Carefully remove the foam packaging from the ValueLoader and then remove the 
bag.

Quick Start Guide