Quantum p7000 Zusätzliches Handbuch

Seite von 22
Quantum ATL P7000 Unpacking Instructions
Document 6434006-02, Ver. 2, Rel. 0
August 2002
8
Unpacking the Library
Unboxing the Library
0
To unbox the library:
1
Choose the unloading side. The ATL P7000 may be unloaded from 
either the right or left side of the pallet.
2
Verify the minimum floor space requirements (see 
Figure 5  Minimum Floor 
Space Requirements—
Uncrating Site
3
Cut the two steel bands that secure the library and packing 
material to the pallet (see 
).
Note:
Uncrating the library requires a minimum of 3 feet 
(91 cm) on all sides. For the side being used for the ramp, 
uncrating the library requires an additional 7 feet (2.13 
m) for a total of 10 feet (3.05 m) on that side. 
 
shows the minimum floor space required by the ATL 
P7000 at its uncrating site. The minimum height required 
for unpacking the ATL P7000 is 85 inches (2.16 meters).
Caution:
The steel bands are under tension and will snap 
away when cut.
3 ft (92cm)
3 ft (92cm)
3 f
t (
92cm)
3 f
t (9
2cm)
Front
Rear
Accessory kits
Library
Ramp extensions
10 ft (3.05 m) for ramp extensions
10 ft (3.05 m) for ramp extensions