Quantum p2000 Betriebsanweisung
Chapter 3 Operator Commands
Moving Cartridges
Moving Cartridges
52
ATL P2000 Series Automated Tape Library User’s Guide
2
Press the Abort button to stop continuous running of the
inventory process, otherwise, the process will continue until all
storage elements have been inventoried.
inventory process, otherwise, the process will continue until all
storage elements have been inventoried.
Moving Cartridges
3
The Move Cartridges command allows you to move any tape
cartridge in the library to the destination you specify. This
destination can be a storage bin, a tape drive, the load port, or the
gripper.
cartridge in the library to the destination you specify. This
destination can be a storage bin, a tape drive, the load port, or the
gripper.
To move a cartridge:
1
On the Operator screen, press the Move Cartridges button.
The GUI displays the Control: Move Cartridges screen, with
the Source input field active (see
the Source input field active (see
).
Note:
The inventory process is also stopped if an error is
detected. In this case, the GUI displays an error message.
detected. In this case, the GUI displays an error message.
Note:
To move a cartridge from a tape drive, issue an Unload
Drive command as explained in
Drive command as explained in