Quantum scalar 100 Betriebsanweisung
page 7
Regulatory Notices
recommended operation limit or more is detected on the +3.3 V/+5 V at the power source.
The operating temperature of the module must be in the temperature range given in the
recommended operating limits. These limits guarantee the laser safety.
The operating temperature of the module must be in the temperature range given in the
recommended operating limits. These limits guarantee the laser safety.
Usage Restrictions
The optical ports of the modules must be terminated with an optical connector or with a
dust plug.
dust plug.
Regulatory Notices
SNC CE Notice
The Storage Networking component is a DC component and its regulatory compliance
hinges on the proper use and installation inside the SC100 library. Installation in any other
hardware/application will negate the regulatory compliance for this component and the
hardware in which it was installed in.
hinges on the proper use and installation inside the SC100 library. Installation in any other
hardware/application will negate the regulatory compliance for this component and the
hardware in which it was installed in.
Marking by the symbol indicates compliance of this tape library to the EMC
(Electromagnetic Compatibility) directive of the European Community. Such marking is
indicative that this tape library meets or exceeds the following technical standards:
(Electromagnetic Compatibility) directive of the European Community. Such marking is
indicative that this tape library meets or exceeds the following technical standards:
•
EN 55022:1998 — “Limits and Methods of Measurement of Radio Interference
Characteristics of Information Technology Equipment.”
Characteristics of Information Technology Equipment.”
•
EN 55024:1998 — “Information technology equipment – Immunity characteristics
– Limits and methods of measurements.”
– Limits and methods of measurements.”
•
EN 61000-3-2 — “Harmonic current emissions test.”
•
EN 61000-3-3 — “Voltage fluctuations and flicker in low-voltage supply systems
test.”
test.”
•
EN 61000-4-2 — “Electrostatic discharge immunity test.”
•
EN 61000-4-3 — “Radiated, radio-frequency, electromagnetic field immunity test.”
•
EN 61000-4-4 — “Electrical fast transient/burst immunity test.”
•
EN 61000-4-5 — “Surge immunity test.”
•
EN 61000-4-6 — “Immunity to conducted disturbances, induced by radio-
frequency fields.”
frequency fields.”
•
EN 61000-4-8 — “Power frequency magnetic field immunity test.”
•
EN 61000-4-11 — “Voltage dips, short interruptions and voltage variations
immunity test.”
immunity test.”
•
EN 60950:1992 + Amd.1:1993 + Amd.2:1993 with considerations to Amd.3:1995
— “Safety of Information Technology Equipment including Electrical Business
Equipment.”
— “Safety of Information Technology Equipment including Electrical Business
Equipment.”