Champion uh-100b Installationsanweisungen

Seite von 84
26
PROBLEM
CAUSE
SOLUTION
Machine will not start.
Door not closed.
Main switch is off.
Unit is unplugged.
Clear door of any obstructions.
Check disconnect or main circuit.
Plug unit back into wall outlet.
Low or no water.
Main water supply is 
turned off.
Turn on house water supply.
Chemicals are not entering 
dishwasher.
Chemical supply container 
is low or empty.
Pick-up tubing is kinked 
or split.
Screen on pick-up tube is 
clogged.
Pick-up tubing is clogged.
Replace or fill chemical supply 
container.
Straighten or replace tubing.
Clean and/or replace screen.
Clear obstruction and flush with 
hot water.
Poor pumped spray 
pressure.
Clogged spray arms or 
nozzles.
Clogged scrap screen.
Clear obstruction and flush with 
hot water.
Clean and/or replace screen.
Troubleshooting      
Poor wash results.
Detergent pick-up tube in 
wrong container.
Wash water temperature 
too low.
Wares incorrectly loaded 
in rack.
No detergent.
Detergent set too low.
Place pick-up tube into the 
correct container.
Have wash thermostat adjusted 
by service agent.
Use correct racks and load 
dishes without nesting.
Replace/refill detergent container.
Have chemical representative 
calibrate setting.
Cycle times increasing 
with each load.
Incoming water 
temperature too low.
Raise incoming water 
temperature.