Champion pp-3 Benutzerhandbuch

Seite von 67
O P E R A T I O N   I N S T R U C T I O N S  
 
Utensils and Silver Ware 
Utensils and Silver Ware must be placed in a utensil basket.  
If your unit was not supplied with a utensil basket, one can 
be ordered from the factory. Contact information is 
provided on the inside cover of this manual. 
To use the utensil basket, simply hang the basket over the 
side of the wash tank, place the utensils and silver ware in 
the basket, and run a wash cycle. 
WARNING
 – Never load sharp objects or silver ware into 
the machine. This could cause serious bodily injury. 
 
Sheet Pans 
Some simple steps must be followed when washing sheet pans to ensure that proper 
cleaning can be achieved. 
If your unit was supplied with a sheet pan rack, place the rack into the wash tank in a vertical 
position (opening on top).  Load the rack with sheet pans, and then pivot the rack to a 
horizontal position. 
To load sheet pans without the rack, insert the sheet pans into the wash tank one at a time 
with the baking side up. Place the pans in an opposite or alternating crisscross pattern, so as 
not to have them stacked inside of each other. 
It is recommended that 10 to 12 pans be placed in the wash tank during a wash cycle. 
If your unit did not come with a sheet pan rack, one can be ordered from the factory. 
Contact information is provided on the inside cover of this manual.   
 
Start the Wash Cycle 
After the wash tank has been loaded, press the cycle start button. Which button you press 
will be determined by which controller that has been installed on your unit. See the section 
on controllers for more details.