Champion pp-3 Benutzerhandbuch

M A I N T E N A N C E  

 

¾  Remove the old controller and install the new one. 

¾  Install the five retainers “C”. 

¾  Connect the three plugs “B”. 

¾  Connect the four Plugs “A” 

¾  Close the hinged panel and replace the two fasteners. 

¾  Turn on Power. 

Replacing Pump 

¾  Turn off and lockout the incoming 

power to the control panel. 

¾  Disconnect the electrical plug by 

removing the retainer and pulling out 
the plug. 

Plug 

¾  Loosen the three hose clamps and 

remove the three hoses “A”. 

¾  Remove the four bolts 

from base of pump “B" 

¾  Replace pump with 

new pump. 

¾  Install the four bolts at 

base of pump “B”. 

¾  Reconnect and tighten 

the three hoses “A”. 

¾  Reconnect the electrical 

plug. 

¾  Turn power back on. 

  

56