Champion usn-72 Betriebsanweisung

Part 4: CLEANING AND MAINTENANCE

4.5 Lubrication Schedules

Weekly Lubrication Requirements

There are no weekly lubrication requirements.

Non-lubrication Requirements

Do not lubricate the points described below.

WARNING:

Do not lubricate the stainless steel conveyor chain or shaft bearings inside

the dishwasher wash and power rinse tanks.

((C) is in machines prior to J1050)

Refer to Figure 4.1 above.

1. NEVER LUBRICATE the stainless steel conveyor chains (A) located inside the

dishwasher.

2. NEVER LUBRICATE the drive shaft bearings (B) located inside the dishwasher on each

side of the conveyor drive shaft. The grease fittings on the top of each bearing serve to

keep out water.

3. NEVER LUBRICATE the idle shaft bearings (B) located inside the dishwasher on each

side of the conveyor take-up assembly. The grease fittings on the top of each bearing serve

to keep out water.

Figure 4.1

Never Lubricate These Points