Citizen Systems CD-S500 Betriebsanweisung

Preparing the Printer

The following are the types of roll paper that can be used by this printer.
Types: 1P roll paper

2P copy roll paper (1 original + 1 copy)
3P copy roll paper (1 original + 2 copies)
(2P and 3P copy roll paper are only usable on models equipped with auto
cutter and rewinder.)

Paper widths: 76.2 (

±0.7)/69.5 (±0.6)/57.5 (±0.5)mm

Roll diameter: 

φ30mm to φ83mm

Core diameter: Interior diameter 

φ10

+2

 mm, exterior diameter 

φ27mm or less

Paper thickness: 1P 0.06 to 0.085mm

Copy paper 0.05 to 0.20mm (total thickness)
But the total thickness that can be cut is from 0.05 to 0.14mm.

1

. Pull the rear cover open lever towards

you to open the rear cover.

2

. Set the attached partition in place if

the roll paper you are using is 69.5mm
wide or 57.5mm wide.
Change the paper width by changing
the value set as the width using the
Soft SW Setting Mode.
(See page 35)

Rear cover open lever

Partition

Location set for width of 57.5mm

Location set for width of 69.5mm

When setting the roll paper, be
careful not to cut your
hand  on  the  edge  of
the paper.

–0