Citizen Systems CLP-621 Betriebsanweisung
49
Appendixes
Item
Description
Printing
Printing method
Thermal transfer/Direct thermal
Resolution
Main scanning line density: 203 dots/inch (8 dots/mm) (CLP-621)
300 dots/inch (11.8 dots/mm) (CLP-631)
Sub- scanning line density: 203 dots/inch (8 dots/mm) (CLP-621)
300 dots/inch (11.8 dots/mm) (CLP-631)
Head 864 dots (printable dots: 832 dots) (CLP-621)
Head 1275 dots (printable dots: 1240 dots) (CLP-631)
Head 1275 dots (printable dots: 1240 dots) (CLP-631)
Max. print width
104 mm (CLP-621)
4.1 inch
105 mm (CLP-631)
Max. print length
812.8 mm
32 inch
Print density
Print density is adjustable with software
Printing speed
Printing speed setting
4, 3 or 2 inches per second.
Print mode
Batch mode
Normal printing (single or multiple sheets)
Tear off mode
Feeds back media to the tear-off position after printing is completed.
Cut mode
*1
Prints while cutting at designated sheet units.
The following two kinds of cut mode operations are done.
• Backfeed
• Cut through
(Cut through refers to stopping present printing to cut the previous label
when it reaches the cut position. After cutting, printing restarts but a gap
may be created at the seam of the printing at this time.)
The following two kinds of cut mode operations are done.
• Backfeed
• Cut through
(Cut through refers to stopping present printing to cut the previous label
when it reaches the cut position. After cutting, printing restarts but a gap
may be created at the seam of the printing at this time.)
Peel mode
*2
Peels labels from the liners after printing them.
Media
Types of media
Roll, fanfold
(continuous media, die-cuts, continuous tags. paper or tickets)
(continuous media, die-cuts, continuous tags. paper or tickets)
Recommended media
Thermal transfer: label media (RP050 Ricoh)
Direct thermal media: label media (140LAB Ricoh), tag media (TB2E0V,
Mitsubishi Paper)
Direct thermal media: label media (140LAB Ricoh), tag media (TB2E0V,
Mitsubishi Paper)
Max. media width
118.0 mm
4.65 inch
Min. media width
19.5 mm
0.77 inch
Min. label width
19.5 mm
0.77 inch
Min. label pitch
*3
6.40 mm
0.25 inch
Max. media thickness
0.254 mm
0.01 inch
Max. media length
812.8 mm
32 inch
Min. media length
6.40 mm
0.25 inch
Min. media thickness
0.0635 mm
0.0025 inch
On-board roll media
Max. external diameter: 127mm
5 inch
diameter
Media core: 25.4 to 76 mm
1 to 3 inch
Ribbon
Recommended ribbon
B110A Ricoh
Max. ribbon width
114.0 mm
4.50 inch
Min. ribbon width
25.4 mm
1.00 inch
Max. ribbon length
360.0 m
1,181 ft
Max. roll diameter
74.0 mm
2.90 inch
Inner diameter of the
25.4
± 0.25 mm
1.00
± 0.01 inch
paper core
Ribbon end tape length
Max. 80.0 mm
3.15 inch
Ribbon end detection
Ribbon out detection by a tension sensor
Specifications
Appendixes