Citizen Systems clp-521z Benutzerhandbuch
2
Printer Operation
32
Menu Setting Table
Page Setup Menu - allows you to change settings related to the media or print quality.
System Setup Menu - allows you to change settings for the printer hardware and basic control systems.
After Print Menu - changes how the printer reacts after the label has been printed.
Interfaces - changes interface parameters such as baud rate.
Top Menu
Sub Menu
Default
Menu
Remarks
Page Setup
Print Speed
4 IPS
2 to 4 IPS
Printing speed setting
Print Darkness
10
00 to 30
Print darkness setting (printhead temperature)
Darkness adjust
0
-10 to 10
Darkness command adjustment
Continuous Media
4.00 IN
0.25 to 32.00 IN
Length
101.6mm
6.35 to 812.8mm
Vertical Position
0.00 IN
-1.00 to 1.00 IN
0.0mm
-25.4 to 25.4mm
Horizontal Shift
0.00 IN
-1.00 to 1.00 IN
Horizontal printing location adjustment
0.0mm
25.4 to 25.4mm
Media Sensor
See Through
See Through
Label sensor selection
Reflect
None
None
Small Media
OFF
ON
Setting for small labels
Adjustment
OFF
Small Media
1.00 IN
0.25 to 1.00 IN
Setting length of small label media
Length
25.4mm
6.35 to 25.4mm
System Setup
Sensor Level
1.5V
0.0V to 3.3V
Setting the threshold of the sensor
Buzzer Select
ON
ON
Setting buzzer sounding conditions
OFF
Metric/Inch
Inch
Inch
Setting the units used
mm
Max Media Length
10.00 IN
1.00 to 50.00 IN
Setting the maximum label length
254.0mm
25.4 to 1270.0mm
Settings Lock
Off
On/Off
Keyboard Lock
Off
On/Off
Prevents the control panel from affecting the
printer's conrfiguration. (User "lock-out")
printer's conrfiguration. (User "lock-out")
Control Code
STD
STD/ALT
Uses the command instead of STX in DMX
(DMX Mode Only)
mode. Sometimes called "AS400 emulation"
Emulation Select
DM4
Datamax compatibility selection
DMI
DMI DataMax IClass
DM4
DM4 DataMax 430 like
DPP
DPP DataMax Prodigy Plus
After Print
AutoConfigure
On
On
Off
Off
Menu Setting
Print start position adjustment; the
lower line is in metric mode.
lower line is in metric mode.
Mode Settings
Setting default length of continuous
media, if selected.
media, if selected.
When on, prevents software commands from
changing the values set by the VuePrint menu
changing the values set by the VuePrint menu
Optional auto configure
On ...... Auto configure effective.
On ...... Auto configure effective.
If a peeler unit or auto-cutter is
installed, each mode is automatically
set regardless of the “function select”
setting.
installed, each mode is automatically
set regardless of the “function select”
setting.