Citizen Systems cl-s700r Benutzerhandbuch
45
Printer Operation
Top Menu
Sub Menu
Default
Menu
Remarks
Rewinder Auto
Off
On
[CL-S700R only]
Online***
Off
Sets the Rewinder Auto Online.
[Rew Auto Online]
In the case in which the setting is On, when
the Rewinder Open Error occurs, if the
Rewinder Cover is closed, it will automatically
return to Online and printing will restart.
the Rewinder Open Error occurs, if the
Rewinder Cover is closed, it will automatically
return to Online and printing will restart.
Rewinder Online
2 sec
1 to 10 sec
[CL-S700R only]
Delay***
Sets the Rewinder Online Delay.
[Rew OnlineDelay]
Sets the time until the Rewinder restarts after
the Rewinder Cover is closed when the above
Rewinder Auto Online is On.
the Rewinder Cover is closed when the above
Rewinder Auto Online is On.
Rewinder Torque***
4
1 to 7
[CL-S700R only]
Sets the Rewinder Torque.
Sets the Rewinder Torque.
Peel Wait Delay**
0.1 sec
0.1 to 2.0 sec
Sets the Peel Wait Delay.
Displays only machines with a peeler
installed.
Displays only machines with a peeler
installed.
Paper Position
0.00 inch
Peel/Cut/Tear Off
Adjusts the stop position. It is based on the
0.00 mm
0.00 to 2.00 inch
inch/millimeter setting. There are initial
0.0 to 50.8 mm
values of the stop position for each device
Peel/Cut/Tear On
set above, and later, relative values are set.
-1.00 to 1.00 inch
-25.4 to 25.4 mm
-25.4 to 25.4 mm
Menu Key Action
Enters Menu
Enters Menu
Sets the menu key action.
Repeat Last Set
Enters Menu:
Repeat Last One
Enters the menu setup mode.
Repeat Last Set:
Repeats the number of copies.
Repeat Last One:
Last one is issued only for the final page.
In the case of a count, afterwards, only
last one is issued.
In the case of a count, afterwards, only
last one is issued.
Note: Hold down the MENU key for at least 4
seconds in order to enter the Menu Setup
Mode when setting the “Repeat Last Set” or
“Repeat Last One” menus.
seconds in order to enter the Menu Setup
Mode when setting the “Repeat Last Set” or
“Repeat Last One” menus.
Interfaces
RS-232C Baud
9600
115200
Setting the baud rate of the serial interface.
57600
• All settings related to the interface are
38400
enabled after the power is reconnected.
19200
9600
4800
2400
9600
4800
2400
RS-232C Parity
None
None
Setting the communication parity for the
Odd
serial interface.
Even
RS-232C Length
8 bits
8 bits
Setting the character length for the serial
7 bits
interface.
RS-232C Stop bit
1 bit
1 bit
Setting the stop bit for the serial interface.
[RS-232C Stopbit]
2 bits
RS-232C X-ON
On Yes
On Yes
Selectively setting the X-ON flow control of
Off No
the serial interface.
IEEE1284
On
On
Setting both direction of the Centro
Off
Interface.
USB Device Class
Printer
Printer
Selects the USB device class.
[USB Device Clas]
VCOM
Mode Settings
[Datamax
®
Emulation]
** Only when cutter is mounted.
*** Only the Rewinder.