Citizen Systems cl-s700r Benutzerhandbuch

57

The printer is already factory-set to the requirements of proper print quality
while using the recommended labels. If the print quality is inferior because
of the different type of media, adjust the printhead position in the following
manner:

1. Looking in at the media thickness check window, reset the

printhead offset so that it comes to the center line (middle of
the three lines) by turning the media thickness adjustment screw
with a screwdriver.
Then turn the media thickness adjustment screw two to four
times counterclockwise with a screwdriver. (Factory setting: two
turns.)

2. Make fine adjustments by checking the self-test print.

1. Looking in at the media thickness check window, reset the

printhead position so that it comes to the center line (middle
of the three lines) by turning the media thickness adjustment
screw with a screwdriver.

2. Then turn the media thickness adjustment screw two to four

times clockwise with a screwdriver.

3. Make fine adjustments by checking the self-test print.

Installing the Media
(p.25, p.27)

Media thickness 

adjustment screw

The relationship between the printhead heating element
and the media thickness check window is shown below: 

Printhead

heating element

Printhead 

heating element

Media thickness check window

Media thickness check window

Media thickness 

check window

Media thickness 

adjustment screw

Media thickness 

adjustment screw

Platen

Platen