Sony str-da4300es Bedienungsanleitung
121
GB
F:\Sony\_DA4300\_DTP\3209655111\3209655111STRDA4300ESUC\01GB-
STRDA4300ESUC\090OTH.fm
STRDA4300ESUC\090OTH.fm
masterpage: Right
STR-DA4300ES
3-209-655-11(1)
3-209-655-11(1)
O
the
r O
r O
p
erati
ons
For details on the connections and settings of
zone 2, see “Listening to the sound in another
zone (ZONE 2 operations)” (page 106).
The following operations are described for
connecting an IR repeater and operating the
receiver in zone 2. When an IR repeater is not
connected, use this receiver in the main zone.
zone 2, see “Listening to the sound in another
zone (ZONE 2 operations)” (page 106).
The following operations are described for
connecting an IR repeater and operating the
receiver in zone 2. When an IR repeater is not
connected, use this receiver in the main zone.
1
Turn on the main receiver (this
receiver).
receiver).
2
Press ZONE 2.
The remote switches to zone 2 mode.
3
Turn on the amplifier in zone 2.
4
Press INPUT SELECTOR on the
remote to select the source
signals you want to output.
remote to select the source
signals you want to output.
For zone 2, analog video and audio
signals are output. When you select
SOURCE, the signals of the current input
are output.
signals are output. When you select
SOURCE, the signals of the current input
are output.
5
Adjust to a suitable volume.
• In the case of illustration 1 or 2
1
Set “SUR BACK SP” to “NO” in the
Speaker settings menu.
Speaker settings menu.
2
Set “ZONE 2 SP” to “ON” in the
Speaker settings menu.
Speaker settings menu.
3
Adjust the volume using MASTER
VOL +/– on the remote.
VOL +/– on the remote.
• In the case of illustration 1 (page 107),
adjust the volume using the receiver of
zone 2.
zone 2.
Tips
• Even when this receiver is standby mode (press
?/1 on the remote to turned off this receiver), the
receiver in zone 2 remains turned on. To turn off all
receivers, press ?/1 and AV ?/1 on the RM-
AAL011 remote at the same time (SYSTEM
STANDBY).
receiver in zone 2 remains turned on. To turn off all
receivers, press ?/1 and AV ?/1 on the RM-
AAL011 remote at the same time (SYSTEM
STANDBY).
• Only signals from components connected to the
analog input jacks are output through the ZONE 2
jacks. No signals are output from components
connected to only the digital input jacks.
jacks. No signals are output from components
connected to only the digital input jacks.
• When SOURCE is selected, the signals input to the
MULTI CHANNEL INPUT jacks are not output
from the ZONE 2 OUT jacks even when the multi-
channel input is selected. The analog audio signals
of the current function are output.
from the ZONE 2 OUT jacks even when the multi-
channel input is selected. The analog audio signals
of the current function are output.
Operating the output to zone 2
4
1
2
5