Sony str-da4600es Betriebsanweisung
108
GB
4
Select the appropriate speaker pattern
so that there are no surround back
speakers and no front high speakers.
so that there are no surround back
speakers and no front high speakers.
5
Press RETURN/EXIT O.
6
Select “Sur Back Assign,” then press
.
7
Select “BI-AMP,” then press
.
The same signals output from the FRONT
A terminals can be output from the
SURROUND BACK/FRONT HIGH/
ZONE 2 terminals.
A terminals can be output from the
SURROUND BACK/FRONT HIGH/
ZONE 2 terminals.
Notes
• You cannot use the FRONT B terminals for a bi-
amplifier connection.
• When you use the auto calibration function, make
the bi-amplifier settings before you perform auto
calibration.
calibration.
• If you make the bi-amplifier settings, the speaker
level, and equalizer settings of the surround back
speakers become invalid, and those of the front
speakers are used.
speakers become invalid, and those of the front
speakers are used.
• Signals output from the PRE OUT jacks are used
with the same settings as those of the SPEAKERS
terminals.
terminals.
• If the speaker pattern is set so that there are
surround back speakers or front high speakers, you
cannot make the bi-amplifier settings.
cannot make the bi-amplifier settings.