Sony STR-DA6400ES Benutzerhandbuch

Press 

V/v repeatedly to select “ON,” 

then press 

.

The Control for HDMI function of the 
receiver is activated.

Press GUI MODE to exit the GUI menu.
If the GUI menu is displayed, the Control 
for HDMI function of the playback 
components will not work properly.

Press one of the HDMI input buttons to 
display the image of the playback 
components for which you want to set 
the Control for HDMI function.

Turn the Control for HDMI function of 

the connected component on. 
For details on setting the connected 
component, refer to its operating 
instructions.

Repeat steps 9 and 10 to set the 

Control for HDMI function and to 
display the image of all the playback 
components you want to use.

By a simple operation (one-touch), 
components connected to the receiver with 
HDMI connections start automatically.
You can enjoy the sound/image using 
connected components.

The receiver and TV are turned on 
simultaneously, and sound and image are 
output from the receiver and TV.

Turn the Control for HDMI function on 
for both the receiver and your 
camcorder. 

Connect your camcorder to the HDMI 
IN 6 jack (page 33).

The receiver and TV are turned on 
simultaneously, and sound and image are 
output from the receiver and TV.

• Connect your camcorder to the HDMI IN 6 jack. 

The camcorder may not work correctly if you 
connect it to the HDMI IN jack on the rear panel.

• Depending on the TV, the start of the content may 

not be output.

You can enjoy the TV sound from the speakers 
connected to the receiver by a simple 
operation. 
Depending on the TV settings, while you are 
watching the TV, the receiver turns on and 
switches to the “TV” function automatically.
TV sound is output from the speakers 
connected to the receiver, and the volume of 
the TV is minimized simultaneously.
You can use the System Audio Control 
function as follows.
• The sound of the TV is output from the 

speakers connected to the receiver when you 
turn the receiver on while the sound is being 
output from the TV speaker.

• You can adjust the receiver’s volume when 

you adjust the TV volume.

You can also operate this function using the 
TV menu. For details, see the operating 
instructions of the TV.

• When “Control for HDMI” is set to “ON,” the 

“Audio Out” settings in the HDMI settings menu 
will set automatically depending on the System 
Audio Control settings.

• When you connect a TV that does not have System 

Audio Control function, the System Audio Control 
function does not work.

• If the TV is turned on before turning on the 

receiver, the TV sound will not be output for a 
moment.