Sony str-dg510 Benutzerhandbuch

• The sound is output from the TV speaker 

only when a playback component and this 
receiver, as well as this receiver and the TV 
are connected via the HDMI jack. To output 
the sound from the supplied speakers and to 
take advantage of the multi channel surround 
sound, be sure to
– connect the digital audio jacks on the 

playback component to the receiver.

– turn off or mute the TV’s volume.

• The multi/stereo area audio signals of a 

Super Audio CD are not output.

• Video signals input to the HDMI IN jack can 

only be output from the HDMI OUT jack. 
The input video signals cannot be output 
from the VIDEO OUT jacks, or MONITOR 
OUT jacks.

• Check the setup of the connected component 

if an image is poor or the sound does not 
come out of a component connected via the 
HDMI cable.

• This receiver may not be able to transfer 

video or audio signals with certain types of 
components.

• Refer to the operating instructions of each 

component connected for details.

• Be sure to turn on the receiver when the video and 

audio signals of a playback component are being 
output to a TV via the receiver. Unless the power is 
turned on, neither video nor audio signals will be 
transmitted.

• When connecting optical digital cords, insert the 

plugs straight in until they click into place.

• Do not bend or tie optical digital cords.
• Be sure to change the factory setting of the VIDEO 

2 input button on the remote so that you can use the 
button to control your blu-ray disc player. For 
details, see “Changing button assignments” (page 
61).

• You can also rename the VIDEO 2 input so that it 

can be displayed on the receiver’s display. For 
details, see “Naming inputs” (page 59).

All the digital audio jacks are compatible with

 

32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling 
frequencies.