Sony str-dg800 Benutzerhandbuch
84
US
F:\Sony SEM
HA\Revision2_DG800\JC060412_2667346121DG800_US\2667346121\US05AMP_STR-DG800-
CEL.fm
HA\Revision2_DG800\JC060412_2667346121DG800_US\2667346121\US05AMP_STR-DG800-
CEL.fm
masterpage: Left
STR-DG800
2-667-346-12 (1)
To record digital sound
Connect a component for playback to the
digital audio input (OPTICAL IN) jack, and
connect the recording component to the
OPTICAL MD/TAPE jack.
digital audio input (OPTICAL IN) jack, and
connect the recording component to the
OPTICAL MD/TAPE jack.
You can record from a video component using
the receiver. See the operating instructions
supplied with your recording component.
the receiver. See the operating instructions
supplied with your recording component.
1
Press one of the input buttons
to select the playback
component.
to select the playback
component.
You can also use INPUT SELECTOR on
the receiver.
the receiver.
2
Prepare the playback
component for playing.
component for playing.
For example, insert the video tape you
want to copy into the VCR.
want to copy into the VCR.
3
Prepare the recording
component.
component.
Insert a blank video tape, etc. into the
recording component (VIDEO 1) for
recording.
recording component (VIDEO 1) for
recording.
4
Start recording on the
recording component, then
start playback on the playback
component.
recording component, then
start playback on the playback
component.
Notes
• Some sources contain copy guards to prevent
recording. In this case, you may not be able to
record from the source.
record from the source.
• The audio signals input to the MULTI CH IN jacks
are not output from the analog AUDIO OUT jacks
even when MULTI CH IN is selected. The analog
audio signals of the current or previously used
input are output.
even when MULTI CH IN is selected. The analog
audio signals of the current or previously used
input are output.
Recording onto a recording
media
media
US01COV_STR-DG800-CEL.book Page 84 Tuesday, March 14, 2006 3:53 PM