Sony STR-DH520 Betriebsanweisung

D:\NORM'S JOB\SONY HA\SO0109\STR-DH520\4263361111_GB\GB04CON_STR-DH520-
U2.fm

STR-DH520

4-263-361-11(1)

• DSD signals of Super Audio CD are not 

input and output.

• Be sure to turn the receiver on when the 

video and audio signals of a playback 
equipment are being output to a TV via the 
receiver. If you set the “PASS.THRU” to 
“OFF”, video and audio signals will not be 
transmitted when the power is turned off.

• Audio signals (format, sampling frequency, 

bit length, etc.) transmitted from an HDMI 
jack may be suppressed by the connected 
equipment. Check the setup of the connected 
equipment if the image is poor or the sound 
does not come out of a equipment connected 
via the HDMI cable.

• Sound may be interrupted when the 

sampling frequency, the number of channels 
or audio format of audio output signals from 
the playback equipment is switched.

• When the connected equipment is not 

compatible with copyright protection 
technology (HDCP), the image and/or the 
sound from the HDMI TV OUT jack may be 
distorted or may be lost.

 

If this is the case, check the specification of 
the connected equipment.

• You can enjoy High Bitrate Audio (DTS-HD 

Master Audio, Dolby TrueHD), Multi 
Channel Linear PCM only with an HDMI 
connection.

• Set the image resolution of the playback 

equipment to more than 720p/1080i to enjoy 
High Bitrate Audio (DTS-HD Master 
Audio, Dolby TrueHD).

• The image resolution of the playback 

equipment may need to be at certain settings 
before you can enjoy Multi Channel Linear 
PCM. Refer to the operating instructions of 
the playback equipment.

• To enjoy 3D images, connect 3D-compatible 

TV and video equipment (Blu-ray Disc 
player, Blu-ray Disc recorder, PlayStation 3, 
etc.) to the receiver using High Speed HDMI 
cables, put on 3D glasses, and then play back 
a 3D-compatible content.

• Depending on the TV or the video 

equipment, 3D images may not be 
displayed.

• Not every HDMI equipment supports all 

functions that are defined by the specific 
HDMI version. For example, equipment that 
support HDMI, version 1.4, may not support 
Audio Return Channel (ARC).

• Refer to the operating instructions of each 

connected equipment for details.

• Before connecting cords, be sure to 

disconnect the AC power cord (mains lead).

• It is not necessary to connect all the cords. 

Connect according to the availability of 
jacks on the connected equipment.

• Use a High Speed HDMI cable. If you use a 

Standard HDMI cable, 1080p, Deep Color 
(Deep Colour) or 3D images may not be 
displayed properly.

• We do not recommend using an HDMI-DVI 

conversion cable. When you connect an 
HDMI-DVI conversion cable to a DVI-D 
equipment, the sound and/or the image may 
be lost. Connect a separate audio cords or 
digital connecting cords, then set the

 

“A. ASSIGN” in AUDIO menu (page 51) 
when the sound is not output correctly.

• When connecting optical digital cords, insert 

the plugs straight until they click into place.

• Do not bend or tie optical digital cords.

All the digital audio jacks are compatible with

 

32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling 
frequencies.