Sony str-dn1020 Betriebsanweisung

D:\NORM'S JOB\SONY HA\SO0126\STR-DN1020\4282218111_GB Web\GB04GET_STR-
DN1020-CEL.fm

STR-DN1020

4-282-218-11(1)

“The channel has been locked.” appears 
and the Parental Lock is set.
To delete the numbers you have entered, 
go back to step 2 by pressing RETURN/
EXIT O, and then repeat the procedure 
above from step 2.

Select a channel you want to change 
the lock code using Category Mode 
(page 60) or Direct Tuning (page 60).

Press TOOLS/OPTIONS.
The option menu appears.

Select “Lock Code”, then press 

.

“Enter your 4-digit lock code.” appears.

Press SHIFT, then press the numeric 
buttons to enter your 4-digit lock code.
“Enter a new lock code.” appears.

Enter a new 4-digit lock code using the 
numeric buttons.
“To confirm, enter your new lock code 
again.” appears.

Reenter the new lock code with the 
numeric buttons.
“The lock code has been changed.” 
appears.

Select a locked channel you want to 
listen to using Direct Tuning (page 60).
“Enter your 4-digit lock code.” appears.

Press SHIFT, then press the numeric 
buttons to enter your 4-digit lock code.
The channel is tuned in.

Select a channel you want to unlock 
using Direct Tuning (page 60).

Press TOOLS/OPTIONS.
The option menu appears.

Select “Parental Lock”, then press 

 

or 

b.

Select “OFF”, then press 

.

“Enter your 4-digit lock code.” appears.

Press SHIFT, then press the numeric 
buttons to enter your 4-digit lock code.
“The channel has been unlocked.” appears 
and the channel is unlocked.

• When you select a channel using Category Mode, 

locked channels are skipped.

• When the receiver is reset to the default settings, 

the lock code returns to the default (0000), but the 
Parental Lock settings are not removed.

• You cannot preset locked channels. If you set the 

Parental Lock for a preset channel, the preset 
information for that channel returns to the default.

• You cannot set the Parental Lock for channel 0 and 

channel 184.

• You can set only one lock code on the receiver. 

You cannot set individual lock codes for each 
channel.