Sony HVR-V1E Betriebsanweisung
122
x
When labeling the cassette
Be sure to place the label only on the
locations shown in the following
illustration so as not to cause a malfunction
of your camcorder.
locations shown in the following
illustration so as not to cause a malfunction
of your camcorder.
x
After using the cassette
Rewind the tape to the beginning to avoid
distortion of the picture or the sound. The
cassette should then be put in its case, and
stored in an upright position.
distortion of the picture or the sound. The
cassette should then be put in its case, and
stored in an upright position.
x
When cleaning the gold-plated
connector
Generally, clean the gold-plated connector
on a cassette with a cotton-wool swab after
every 10 times it has been ejected.
If the gold-plated connector on the cassette
is dirty or dusty, the remaining tape
indicator may not show correctly.
Generally, clean the gold-plated connector
on a cassette with a cotton-wool swab after
every 10 times it has been ejected.
If the gold-plated connector on the cassette
is dirty or dusty, the remaining tape
indicator may not show correctly.
On Sony HDV1080i compliant TVs
An HDV format compatible TV with the
component input jack is required to view
playback pictures recorded in the HDV
format.
component input jack is required to view
playback pictures recorded in the HDV
format.
REC
SAVE
REC: The cassette can be
recorded.
SAVE: The cassette cannot be
recorded (write-protected).
recorded.
SAVE: The cassette cannot be
recorded (write-protected).
Do not put a label
along this border.
along this border.
Labeling position
Gold-plated connector
HDV format and recording/playback (Continued)