Sony bdp-s560 Handbuch
32
8
Select “Access point scan,” and press
ENTER.
ENTER.
The player will detect nearby access
points and display the SSID (Service Set
Identifier) and security settings.
points and display the SSID (Service Set
Identifier) and security settings.
9
When your wireless LAN router (access
point) is not detected, press RETURN
and repeat from step 8 after a while. If the
router is still not detected, press
RETURN to select “Manual registration”
in step 8. For details, see “Internet
Settings” on page 55.
point) is not detected, press RETURN
and repeat from step 8 after a while. If the
router is still not detected, press
RETURN to select “Manual registration”
in step 8. For details, see “Internet
Settings” on page 55.
10
Check the security, and press ENTER.
z
The appropriate security is automatically
selected. You do not normally need to change
the security.
selected. You do not normally need to change
the security.
11
Press ENTER to input the WEP or WPA
key.
key.
To enter characters, see page 57.
b
,
in step 12, you cannot check the
characters on the screen.
12
Press ,.
b
The WEP or WPA key is displayed as 8
asterisks no matter how many characters you
enter.
asterisks no matter how many characters you
enter.
13
Select “Auto Acquisition,” and press
ENTER.
ENTER.
14
Select “Auto,” and press ENTER.
15
Select “Do not use,” and press
ENTER.
ENTER.
If your Internet service provider has a
specific proxy server setting, select
“Use.” For details, see “Network
Settings” on page 55.
specific proxy server setting, select
“Use.” For details, see “Network
Settings” on page 55.
16
Select “Perform” using M/m, and
press ENTER.
press ENTER.
The network diagnostic starts.
Results are displayed after the player
finishes the network diagnostic.
If an error message appears, follow the
on-screen instructions.
For further details, visit the following
website and check the FAQ contents:
http://www.sony.com/blurayupdate
Results are displayed after the player
finishes the network diagnostic.
If an error message appears, follow the
on-screen instructions.
For further details, visit the following
website and check the FAQ contents:
http://www.sony.com/blurayupdate
17
Select “Finish,” and press ENTER.
18
Check the settings, and select
“Finish,” then press ENTER.
“Finish,” then press ENTER.
The message “Settings are complete.”
appears.
If an error message appears in the
network diagnostic results, check the
message and set the network settings
again.
appears.
If an error message appears in the
network diagnostic results, check the
message and set the network settings
again.