Sony dvp-nc555es Handbuch

Seite von 88
D:\##sagyou\#05 May\824163S 
DVPNC555ES_US\3082036112 
DVPNC555ES_US\01US05HOO-U2.fm
master page=left
DVP-NC555ES
3-082-036-11(2)
26
: Connecting to the 5.1ch input jacks
You can enjoy 5.1ch surround sound using 
the internal Dolby Digital, DTS, or Super 
Audio CD Multi decoder of this player.
: Connecting to a digital jack
This connection will allow you to use the 
Dolby Digital or DTS decoder function of 
your AV amplifier (receiver). You are not 
able to enjoy the surround sound effects of 
this player.
z
Hints
• For correct speaker placement, refer to the 
instructions of the connected components.
• To enhance the sound performance:
– Use high-performance speakers.
– Use front, rear, and center speakers of the same 
size and performance.
– Place the subwoofer between the left and right 
front speakers.
• Use connection 
 when connecting to 7 or 
more speakers (6.1 ch or more).
Notes
For connection 
• After you have completed the connection, be sure 
to set “DOLBY DIGITAL” to “DOLBY 
DIGITAL” and “DTS” to “DTS” in Quick Setup 
(page 27). 
• When you connect an amplifier (receiver) that 
conforms to the 96kHz sampling frequency, set 
“48kHz/96kHz PCM” in “AUDIO SETUP” to 
“96kHz/24bit” (page 76).
• Super Audio CD audio signals are not output from 
the digital jack.
D-1
D-2
D-2
D-2