Sony dvp-nc555es Handbuch

Seite von 88
D:\##sagyou\#05 May\824163S 
DVPNC555ES_US\3082036112 
DVPNC555ES_US\01US12SET-U2.fm
master page=left
DVP-NC555ES
3-082-036-11(2)
78
Note
If each of the front or rear speakers are not placed at 
an equal distance from your listening position, set 
the distance according to the closest speaker.
◆ LEVEL (FRONT)
Varies the level of the front speakers. Be sure 
to set “TEST TONE” to “ON” for easy 
adjustment.
The default adjustments are in parentheses.
◆ LEVEL (REAR)
Varies the level of the rear speakers. Be sure 
to set “TEST TONE” to “ON” for easy 
adjustment.
The default adjustments are in parentheses.
To adjust the volume of all the speakers at 
one time
Use the amplifier’s (receiver’s) volume 
control.
◆ TEST TONE
The speakers will emit a test tone. Use this 
when you use the 5.1CH OUTPUT jacks and 
adjust “LEVEL (FRONT)” and “LEVEL 
(REAR).”
Adjusting the speaker volume 
and level
1
Select “SPEAKER SETUP” in the Setup 
Display.
2
Select “TEST TONE” and set to “ON.”
You will hear the test tone from each 
speaker in sequence.
3
From your listening position, select 
“LEVEL (FRONT)” or “LEVEL (REAR)” 
and adjust the value using 
X/x.
The test tone is emitted from both left and 
right speakers simultaneously.
4
Select “TEST TONE” and set to “OFF” 
to turn off the test tone.
Note
The test tone signals are not output from the digital 
jack.
L (0 dB)
Set this between –6 dB and 0 
dB in 0.5 dB increments.
R (0 dB)
Set this between –6 dB and 0 
dB in 0.5 dB increments.
CENTER 
(0 dB)
Set this between –12 dB and 
0 dB in 0.5 dB increments.
SUBWOOFER 
(DVD: –5 dB/
SUPER 
AUDIO CD: 
0 dB)
For DVDs:
(When “SIZE” are set to the 
default settings):
Set this between –10 dB 
and +10 dB in 0.5 dB 
increments.
(When “SIZE” are not set to 
the default settings):
Set this between –15 dB 
and +5 dB in 0.5 dB 
increments.
For Super Audio CDs:
Set this between –10 dB and 
+10 dB in 0.5 dB increments.
L (0 dB)
Set this between –12 dB and 
0 dB in 0.5 dB increments.
R (0 dB)
Set this between –12 dB and 
0 dB in 0.5 dB increments.
OFF
The test tone is not emitted 
from the speakers.
ON
The test tone is emitted from 
each speaker in sequence while 
adjusting balance or level.