Sony dvp-ns76h Betriebsanweisung

E

Connect a SCART cord (not supplied). Be sure to make the connections firmly to avoid hum and 
noise. When you connect using the SCART cord, check that the TV conforms to S video or RGB 
signals. Refer to the operating instructions supplied with the TV to be connected. Also, when 
you set “LINE” to “S VIDEO” or “RGB” under “SCREEN SETUP” in the Setup Display 
(page 67), use a SCART cord that conforms to each signal.
With this connection, select “NORMAL (INTERLACE)” (default) by pressing the 
PROGRESSIVE button on the front panel.

Depending on the disc, the image may not fit your TV screen. To change the aspect ratio, see 
page 66.

• Do not connect a VCR, etc., between your TV and the player. If you pass the player signals via the VCR, 

you may not receive a clear image on the TV screen. If your TV has only one audio/video input jack, 
connect the player to this jack.

• If you set “LINE” in SCREEN SETUP to “RGB” (page 67), the player outputs no component video signals.

By using the PROGRESSIVE button on the front panel, you can select the signal format in 
which the player outputs video signals (Progressive or Interlace), and the conversion method for 
progressive signals. The PROGRESSIVE indicator lights up when the player outputs 
progressive signals.
Each time you press the PROGRESSIVE button, the display changes as follows:

PROGRESSIVE AUTO

m

PROGRESSIVE VIDEO

m

NORMAL (INTERLACE)

When you play a disc recorded in the NTSC colour system, the player outputs the video signal 
or the Setup Display etc. in the NTSC colour system and the picture may not appear on the 
PAL colour system televisions. In this case, open the tray and remove the disc.

VCR

CD/DVD player

TV

Connect 
directly

,