Sony dvp-ns76h Betriebsanweisung

A

This connection will use your TV’s or stereo 
amplifier’s (receiver’s) two speakers for 
sound. Connect using the audio/video cord 
(supplied).

• Surround effect (page 42)
TV: Dynamic Theatre, Dynamic, Wide, 
Night

Stereo amplifier (receiver): Standard, Night

B

If your AV amplifier (receiver) has a Dolby 
Digital*

1

, DTS*

2

 or MPEG audio decoder 

and a digital input jack, use this connection.
Connect using a coaxial or optical digital 
cord/HDMI cord (not supplied).

• Surround effect
Dolby Digital (5.1ch), DTS (5.1ch), MPEG 
audio (5.1ch)

*1

Manufactured under license from Dolby 
Laboratories.
“Dolby,” “Pro Logic,” and the double-D symbol 
are trademarks of Dolby Laboratories.

*2

“DTS” and “DTS Digital Out” are trademarks of 
Digital Theater Systems, Inc.

• After you have completed the connection, be sure 

to set “DOLBY DIGITAL” to “DOLBY 
DIGITAL” and “DTS” to “ON” in Quick Setup 
(page 22). If your AV amplifier (receiver) has an 
MPEG audio decoder function, set “MPEG” to 
“MPEG” in Audio Setup (page 71). Otherwise, no 
sound or a loud noise will come from your 
speakers.

• When you connect an amplifier (receiver) that 

conforms to the 96 kHz sampling frequency, set 
“48kHz/96kHz PCM” in “AUDIO SETUP” to 
“96kHz/24bit” (page 71).

• The TVS effects of this player cannot be used 

with this connection.

• When you connect the player to an AV amplifier 

(receiver) using an HDMI cord, you will need to 
do one of the following:

– Connect the AV amplifier (receiver) to the TV 

with the HDMI cord.

– Connect the player to the TV with a video cord 

other than HDMI cord (component video cord, S 
VIDEO cord, or audio/video cord).

• When connecting to the HDMI OUT jack, 

carefully align the HDMI connector with the jack. 
Do not bend and apply pressure to the HDMI 
cord.

Yellow

White (L)

Red (R)

Yellow

White (L)

Red (R)

Coaxial cord

Optical cord

HDMI cord