Sony dvp-ns92v Betriebsanweisung

• SUBWOOFER

• The cut off frequency for the subwoofer is fixed at 

120 Hz.

• If your speakers are too small to reproduce low 

bass frequencies, utilize a subwoofer for low 
frequency sound. When you set the speaker 
settings to “SMALL,” the bass redirection 
circuitry will be activated and the bass 
frequencies for the speakers are output from the 
subwoofer.

• Even if there are fewer than 6 speakers connected, 

the player distributes the audio signal components 
to the front speakers.

◆ DISTANCE

Sets the distance from your listening position 
to the speakers. 
Set the distance to your front speakers in 
“FRONT” first (A). Then adjust the values in 
“CENTER” (centre speaker B), and 
“REAR” (rear speaker C) , and  
“SUBWOOFER” (D) to reflect the actual 
distance to your centre speaker, rear speakers, 
and subwoofer.

Be sure to change the value in the Setup 
Display each time you move the speakers. 
Start from the front speaker. The default 
adjustments are in parentheses.

If each of the front or rear speakers are not placed at 
an equal distance from your listening position, set 
the distance according to the closest speaker.

YES

Select this if you connect a 
subwoofer to output the LFE 
(Low Frequency Effect) signals 
from the subwoofer.

NONE

Select this if you do not connect 
a subwoofer.

FRONT 
(3m)

Set this between 1 and 15m 
in 0.2m increments.

CENTRE (3m)

Set this within –1.6 and  
+0.6m of the “FRONT” 
setting in 0.2m increments. 
For example, if “FRONT” 
is set to 6m, “CENTER” 
can be set between 4.4 and 
6.6m.

REAR (3m)

Set this within –5 and 
+0.6m of the “FRONT” 
setting in 0.2m increments. 
For example, if “FRONT” 
is set to 6m, “REAR” can 
be set between 1 and 6.6m.

SUBWOOFER 
(3m)

Set this within –1.6 and 
+0.6m of the “FRONT” 
setting in 0.2m increments. 
For example, if “FRONT” 
is set to 6m, 
“SUBWOOFER” can be 
set between 4.4 and 6.6m.

B

D

A

A

C

C

(1~15 m)

(1~15 m)

,