Sony rdr-gx257 Betriebsanweisung
19
H
ook
up
s and
s and
Se
tti
tti
n
gs
To return to the previous step
Press O RETURN or
< according to the
display.
z
Hint
If you want to run “Initial Setup” again, select the
relevant setup items from the Setup menu (page 62).
relevant setup items from the Setup menu (page 62).
1
Turn on the recorder and the cable box/
satellite receiver.
satellite receiver.
2
Press SYSTEM MENU to turn on the System
Menu.
Menu.
3
Select [Setup] and press ENTER.
The Setup display appears.
4
Select
[Video] and press ,.
5
Select [Set-Top Box Control] and press
,.
,.
6
Select [On] and press ENTER.
The display shows the current setting for the
cable box/satellite receiver control.
cable box/satellite receiver control.
7
Select [Edit] and press ENTER.
The display for setting the cable box/satellite
receiver control appears.
receiver control appears.
8
Select an option and press ENTER.
[Device Type]: Selects the type of cable box/
satellite receiver.
[Brand]: Selects the brand name of cable box/
satellite receiver. Press
satellite receiver.
[Brand]: Selects the brand name of cable box/
satellite receiver. Press
</, to select the
brand name initial and press ENTER. Then
select the brand and press ENTER.
[Number of Digits]: Selects the number of
digits for your cable box/satellite receiver’s
channel.
[ENTER key]: Selects whether you need to
press the ENTER button each time after
entering the channel number.
[Key Speed]: Selects the speed to send
commands to the cable box/satellite receiver.
[Test]: Checks that the control works
correctly (see below).
select the brand and press ENTER.
[Number of Digits]: Selects the number of
digits for your cable box/satellite receiver’s
channel.
[ENTER key]: Selects whether you need to
press the ENTER button each time after
entering the channel number.
[Key Speed]: Selects the speed to send
commands to the cable box/satellite receiver.
[Test]: Checks that the control works
correctly (see below).
1
Select [Test] in step 8 above and press
ENTER.
ENTER.
2
Check the overall connection and press
ENTER.
ENTER.
3
Check that the cable box/satellite receiver
is turned on, and press ENTER.
is turned on, and press ENTER.
4
Press </, to select a code for the
recorder’s remote and press ENTER.
recorder’s remote and press ENTER.
5
Press </M/m/, to enter a channel (any
channel), select [OK], and press ENTER.
channel), select [OK], and press ENTER.
6
Check if the same channel is selected on
the cable box/satellite receiver.
the cable box/satellite receiver.
• If the same channel is not selected, return to
step 4 by pressing O RETURN repeatedly
and try one of the other code(s) until you
find the one that works.
and try one of the other code(s) until you
find the one that works.
7
Select [Yes] and press ENTER.
8
Select [Exit] and press ENTER to close the
display.
display.
Setting up the cable box/satellite
receiver control
receiver control
On
Disc Record Mode
DV Input
Auto Chapter
Set-Top Box Control
Set-Top Box Edit
Off
Device Type
Brand
Number of Digits
ENTER Key
Cable Box
Satellite Box
Digital Video Recorder
Other Set-Top Boxes
Key Speed
Test
Set-Top Box Edit
A
Checking the cable box/satellite
receiver control setting
receiver control setting
,continued