Sony rdr-gx330 Handbuch

“Check Overlap”: 
Checks for overlapped settings.
The timer setting without the 

 mark 

has priority over the other settings.

To change the priority of a program, 
press 

</, to select “Change.” For 

details, see “Changing the priority of 
overlapped settings” on page 45.

Select “Close” to return to the Timer List.
To change or cancel the setting, repeat 
steps 2 and 3 above.

Press 

 

REPLAY

/

ADVANCE

 

 while 

the list display is turned on. Each time you 
press 

 

REPLAY

/

ADVANCE

 

, the 

entire Timer List changes to the next/
previous page of timer settings.

Press TIMER LIST or O RETURN.

z

While recording, you cannot modify the timer 
setting for the current recording, but you can extend 
the duration of the recording time (page 41).

b

• Even if the timer is set, timer recordings cannot be 

made while recording a program that has priority.

• Even if the timer is set for the same daily or 

weekly program, the timer recording cannot be 
made if it overlaps with a program that has 
priority. “

” will appear next to the overlapped 

setting in the Timer List. Check the priority order 
of the settings.

If the timer settings overlap, the program that 
was set last has priority and will be recorded. 
A timer recording of lower priority may be 
canceled, start from the middle or stop 
midway through the program.
You can change the priority of a program if 
necessary.

The program set last has priority.

Example: You set the timer in order of A, B, 
and C (setting C has first priority) 

If you give setting B priority over setting C, 
all of program B will be recorded and 
program C is recorded only after program B 
has ended.

If program B has priority, the end of program 
A will be cut off.

will be cut off

Actual recording

,continued