Sony rdr-gx330 Handbuch
75
Se
tti
tti
n
g
s an
d Adj
d Adj
u
st
m
ent
s
s
Progressive Mode
DVD software can be divided into two types:
film based software and video based
software. Video based software is derived
from TV and displays images at 30 frames/60
fields per second. Film based software is
derived from film and displays images at 24
frames per second. Some DVD software
contains both Video and Film.
In order for these images to appear natural on
your screen when output in progressive
mode, the progressive video signal needs to
be converted to match the type of DVD
software that you are watching.
You can fine-tune the progressive 480p video
signal that is output when you set
“Progressive Output” to “On.”
Note that you must connect to a progressive
format TV using the COMPONENT VIDEO
OUT jacks (page 16).
film based software and video based
software. Video based software is derived
from TV and displays images at 30 frames/60
fields per second. Film based software is
derived from film and displays images at 24
frames per second. Some DVD software
contains both Video and Film.
In order for these images to appear natural on
your screen when output in progressive
mode, the progressive video signal needs to
be converted to match the type of DVD
software that you are watching.
You can fine-tune the progressive 480p video
signal that is output when you set
“Progressive Output” to “On.”
Note that you must connect to a progressive
format TV using the COMPONENT VIDEO
OUT jacks (page 16).
b
Note
When picture noise appears after you set the
recorder to progressive format, hold down
x STOP, and press CHANNEL – (minus) on the
unit.
recorder to progressive format, hold down
x STOP, and press CHANNEL – (minus) on the
unit.
Line Input
Sets the method of inputting video signals
from the LINE IN jacks on the rear panel of
the recorder. Select an option for each of the
items below according to the combination of
jacks and methods that you are going to use.
from the LINE IN jacks on the rear panel of
the recorder. Select an option for each of the
items below according to the combination of
jacks and methods that you are going to use.
Line1 Input
Selects a method of inputting video signals
for the LINE 1 IN jack on the rear panel of the
recorder.
for the LINE 1 IN jack on the rear panel of the
recorder.
Pause Mode (DVDs only)
Selects the picture quality in pause mode.
Auto Display
Screen Saver
The screen saver image appears when you do
not use the recorder for more than 10 minutes
while an on-screen display, such as the
System Menu, is displayed on your TV
screen. The screen saver image helps prevent
your display device from becoming damaged
(ghosting).
not use the recorder for more than 10 minutes
while an on-screen display, such as the
System Menu, is displayed on your TV
screen. The screen saver image helps prevent
your display device from becoming damaged
(ghosting).
Auto
Automatically detects the
software type (Film-based or
Video-based) and selects the
appropriate conversion mode.
Normally select this position.
software type (Film-based or
Video-based) and selects the
appropriate conversion mode.
Normally select this position.
Video
Fixes the conversion mode to
the mode for Video-based
software.
the mode for Video-based
software.
Video
Inputs video signals.
S Video
Inputs S video signals.
Auto
The picture, including
subjects that move
dynamically, is output with
no jitter. Normally select this
position.
subjects that move
dynamically, is output with
no jitter. Normally select this
position.
Frame
The picture, including
subjects that do not move
dynamically, is output in high
resolution.
subjects that do not move
dynamically, is output in high
resolution.
On
Automatically displays
information on the screen
when the recorder is turned
on, etc.
information on the screen
when the recorder is turned
on, etc.
Off
Displays information only
when DISPLAY is pressed.
when DISPLAY is pressed.
On
Turns on the screen saver
function.
function.
Off
Turns off the function.