Draytek 2100g Anleitung Für Quick Setup

 

 

14

obtained dynamically through 802.1x. 

Accepts WEP and WPA clients simultaneously and the 
encryption key should be entered in WEP Key and PSK 
respectively. 

Accepts WEP and WPA clients simultaneously and the 
encryption key is obtained dynamically through 802.1x. 

Accepts only WPA clients and the encryption key should be
entered in PSK. 

Accepts only WPA clients, and the encryption key is 
obtained dynamically through 802.1x. 

 

 

Note: You should also set RADIUS Server simultaneously if 
WEP/802.1x or WPA/802.1x, WEP/802.1x Only or WPA/802.1x Only 
mode is selected. 

3. 

For WPA encryption, type in 8~63 ASCII characters or 64 Hexadecimal digits 

leading by 0x, for example "0123456789ABCD...." or "0x321253abcde....." on the 
field of Pre-Shared Key (PSK). WPA encrypts each frame transmitted from the 
radio using the Pre-Shared Key (PSK) which entered from this panel or a key got 
dynamically through 802.1x.   

4. 

As to WEP encryption, select 64-bit or 128-bit as the encryption mode. For 64bits 

WEP key, type in 5 ASCII characters or 10 hexadecimal digitals leading by 0x, for 
example, ABCDE or 0x4142434445. And for 128bits WEP key, type in 13 ASCII 
characters or 26 hexadecimal digits leading by 0x, for example, ABCDEFGHIJKLM 
or 0x4142434445464748494A4B4C4D. There are four sets of WEP Keys that you 
can type. Select any one of them as the WEP key. 

 

Note: 128 bits WEP is most secure, but has more encryption/decryption 
overhead. Note that all wireless devices must support the same WEP 
encryption bit size and have the same key. Four keys can be entered here, 
but only one key can be selected at a time. The keys can be entered in 
ASCII or Hexadecimal. Click the circle under Use next to the key you 
wish to use. 

5. 

Click OK to save settings.