LevelOne FSW-0822 Betriebsanweisung
Unpacking Information
Thank you for purchasing FSW-0822 Ethernet Switch. Before installation, please verify
that your package contains the following items.
that your package contains the following items.
1.
One FSW-0822 Ethernet Switch
2.
One AC power cord
3. Rack-mount
brackets
4. Stackable
kit
5. Manual
CD
Introduction
General Description
The device is a powerful, high-performance Fast Ethernet Switch, with all 8 ports capable
of 10 or 100Mbps auto-negotiation operation (NWay), which means the switch could
automatically negotiate with the connected partners on the network speed and duplex
mode. It is ideal for micro-segmenting large networks into smaller, connected subnets for
improved performance, enabling the bandwidth demanding multimedia and imaging
applications. Moreover, the 10/100Mbps auto-sensing ability provides an easy way to
migrate 10Mbps to 100Mbps network with no pain.
of 10 or 100Mbps auto-negotiation operation (NWay), which means the switch could
automatically negotiate with the connected partners on the network speed and duplex
mode. It is ideal for micro-segmenting large networks into smaller, connected subnets for
improved performance, enabling the bandwidth demanding multimedia and imaging
applications. Moreover, the 10/100Mbps auto-sensing ability provides an easy way to
migrate 10Mbps to 100Mbps network with no pain.
This switch supports PoE, which supplies power for connected devices via CAT 5 and
above twisted cables. By integrating the data transmitting cable and power cord, it
eliminates the effort constructing your network. You could easily connect a Wireless AP or
a VoIP phone to this switch without looking outlets for them. Over current protection and
circuit shorting protection are also supported to ensure the safety.
above twisted cables. By integrating the data transmitting cable and power cord, it
eliminates the effort constructing your network. You could easily connect a Wireless AP or
a VoIP phone to this switch without looking outlets for them. Over current protection and
circuit shorting protection are also supported to ensure the safety.
The switch is plug-n-play without any software to configure and also fully compliant with all
kinds of network protocols. Moreover, the rich diagnostic LEDs on the front-panel provide
the operating status of individual port and whole system.
kinds of network protocols. Moreover, the rich diagnostic LEDs on the front-panel provide
the operating status of individual port and whole system.
Key Features
Complies with 10BASE-T specifications of the IEEE802.3 standard
Complies with 100BASE-TX specifications of the IEEE802.3u standard
Complies with IEEE 802.3af PoE standard (DTE power via MDI-X)
Provides 4 PoE ports with classification identify
Supports 15.4W maximum per PoE port
Supports over current protection and circuit shorting protection
8 * RJ-45 ports for 100BASE-TX and 10BASE-T connectivity
Supports NWay protocol for speed (10/100Mbps) and duplex mode (Half/Full)
Complies with 100BASE-TX specifications of the IEEE802.3u standard
Complies with IEEE 802.3af PoE standard (DTE power via MDI-X)
Provides 4 PoE ports with classification identify
Supports 15.4W maximum per PoE port
Supports over current protection and circuit shorting protection
8 * RJ-45 ports for 100BASE-TX and 10BASE-T connectivity
Supports NWay protocol for speed (10/100Mbps) and duplex mode (Half/Full)
auto-detection
Supports MDI/MDI-X auto crossover
Wire-speed packet filtering and forwarding rate
Wire-speed packet filtering and forwarding rate
-1-