Roland PCR-30 Benutzeranleitung
161
Convenient functions
■
Specifying the location of the data
Here’s how to specify the location and data type of the variable portion (data) within a system
exclusive message.
The range of data values will be the default range in the case of Basic mode or Advanced mode 3.
In the case of Advanced modes 1 and 4, you can specify the range of data values.
For an actual example, please read the Sys Ex,ASSIGN section
exclusive message.
The range of data values will be the default range in the case of Basic mode or Advanced mode 3.
In the case of Advanced modes 1 and 4, you can specify the range of data values.
For an actual example, please read the Sys Ex,ASSIGN section
1. Press the
[DATA]
key at the location where you want to input the data.
The display will indicate “DT0”.
2. Use the
[0]
–
[4]
keys to select the type of data.
*
In the case of DT1--DT4 (data consisting of two or more bytes), a data location will automatically be
allocated for the next byte, and "-DT" will be displayed. (This cannot be changed.)
allocated for the next byte, and "-DT" will be displayed. (This cannot be changed.)
3. Press the
[ENTER]
button.
4. If you selected DT1 through DT4, the display will indicate “-DT”.
Press the
[ENTER]
button.
Data
number
number
Data type
Default range
Target of range setting
Example
(specified upper/lower limits)
(specified upper/lower limits)
DT0
7bit
00H–7F
Specify the range of data
(00–7FH)
(00–7FH)
04–45
(lower limit 4H, upper limit 45H)
(lower limit 4H, upper limit 45H)
DT1
4bit/4bit
0H/0H–FH/FH
Specify the range of the first
byte (0–FH), second byte is
fixed at 0–FH
byte (0–FH), second byte is
fixed at 0–FH
0/0–D/F
(lower limit 0H, upper limit DH)
(lower limit 0H, upper limit DH)
DT2
7bit/7bit
(MSB/LSB)
(MSB/LSB)
00H/00H–7FH/7FH
Specify the MSB range (00–7F),
LSB is fixed at 00–7F
LSB is fixed at 00–7F
23/00–68/7F
(lower limit 23H, upper limit 68H)
(lower limit 23H, upper limit 68H)
DT3
7bit/7bit
(LSB/MSB)
(LSB/MSB)
00H/00H–7FH/7FH
Specify the MSB range (00–7F),
LSB is fixed at 00–7F
LSB is fixed at 00–7F
00/23–7F/68
(lower limit 23H, upper limit 68H)
(lower limit 23H, upper limit 68H)
DT4
4bit/4bit/
4bit/4bit
4bit/4bit
7H/FH/0H/1H–
8H/0H/FH/FH
8H/0H/FH/FH
Specify the limits of positive/
negative change as a value
from 00H to FFH, centered on
8000H.
negative change as a value
from 00H to FFH, centered on
8000H.
7/F/0/2–8/0/5/0
(lower limit FEH, upper limit 50H)
(lower limit FEH, upper limit 50H)
8000H
FF
FF
max
min