Roland VK-8 Benutzeranleitung
10
Panel Descriptions
1.
[MASTER VOLUME] knob
■
VIBRATO AND CHORUS
2.
VIBRATO AND CHORUS [ON] button
3.
[VIBRATO AND CHORUS] knob
■
D BEAM
4.
D BEAM controller
You can modify the sound by moving your hand over
the D Beam controller (p. 34).
the D Beam controller (p. 34).
5.
D BEAM [ON] button
6.
D BEAM button
Selects the effect that will be controlled by the D Beam
controller (p. 34).
controller (p. 34).
■
TONE WHEEL
7.
[LEAKAGE] knob
Allows you to independently add leakage noise,
separately from the leakage noise selected by the wheel
type (p. 27).
separately from the leakage noise selected by the wheel
type (p. 27).
8.
[TONE WHEEL] button
■
AMPLIFIER
9.
[OVERDRIVE] knob
10.
[AMPLIFIER] button
Switches the frequency response and cabinet resonance
of the virtual amp (p. 33).
of the virtual amp (p. 33).
11.
[TONE] knob
■
REVERB
12.
REVERB [LEVEL] knob
13.
[REVERB] button
■
OTHER TONES
14.
[SPLIT] button
Divide the keyboard into two halves, and assign a
different sound to each area (p. 38, 44).
different sound to each area (p. 38, 44).
15.
[H-BAR MANUAL] button (Harmonic Bar
Manual)
Manual)
When this function is used, the harmonic bar settings
will change from the settings of the preset to the
positions (settings) of the harmonic bars on the panel (p.
23).
will change from the settings of the preset to the
positions (settings) of the harmonic bars on the panel (p.
23).
16.
[WRITE] button
17.
[BANK] button
18.
[PRESET] button
Pressed to enter Preset Select mode (p. 22, p. 45).
Allows the [1]–[8] buttons to be used for selecting
presets.
Allows the [1]–[8] buttons to be used for selecting
presets.
25
1
27
7
31
30
29
26
28
6
5
2
4
3
8
VK-8_e.book 10 ページ 2005年7月25日 月曜日 午後4時24分