Roland VK-8 Benutzeranleitung

Seite von 84
 
52
Advanced Use
 
 
PERCUSSION H-BAR LEVEL (0–127)
 
Adjusts the volume of the harmonic bars when percussion 
is normal (the [SOFT] button’s indicator is dark). As this 
value is increased, the sound of the harmonic bars will be 
less affected by the percussion.
 
 
MIDI-related Settings
 
 
When setting things other than the MIDI 
channel
 
1.
 
Hold down the HARMONIC BAR PART [UPPER] and 
[PEDAL] buttons and press the [REVERB] button.
 
The indicators of buttons [1]–[8] will blink.
 
2.
 
Press one of the buttons from [1] through [8] to select 
the parameter that you want to edit. 
 
There are 13 MIDI-related parameters. You can select all 
of these parameters by controlling the lighted/
extinguished state of the [PRESET] button’s indicator.
The following parameters are assigned to each button.
 
[PRESET] button’s indicator extinguished
[PRESET] button’s indicator lighted
 
3.
 
Turn the [VIBRATO AND CHORUS] knob to adjust 
the setting.
 
If you press the VIBRATO AND CHORUS [ON] button, 
the setting will return to its initial value.
On tone wheel organs, turning the percussion on would 
lower the overall volume specified by the harmonic bars. 
This is because the percussion on tone wheel organs was 
designed not to impair the volume balance of the entire 
organ. The VK-8 allows you to adjust this change in 
volume balance.
 
Button
Parameter
Page
 
[1]
LOCAL CONTROL
[2]
MIDI THRU
[3]
SUB KEYBOARD FUNCTION
[4]
CONTROL MIDI CH.
 (Control MIDI Channel)
[5]
UPPER ORGAN MIDI CH.
 (Upper Organ MIDI Channel)
[6]
LOWER ORGAN MIDI CH. 
(Lower Organ MIDI Channel)
[7]
PEDAL ORAGN MIDI CH. 
(Pedal Organ MIDI Channel)
[8]
OTHER TONES MIDI CH. 
(Other Tones MIDI Channel)
 
Button
Parameter
Page
 
[1]
DRUM MIDI CH.
(Drum MIDI Channel)
[2]
SPRING SHOCK MIDI CH.
[3]
MIDI SOUND CONTROLLERS 
SWITCH
[4]
MIDI GENERAL CONTOROLLERS 
SWITCH
[5]
MIDI PROGRAM CHANGE 
SWITCH
VK-8_e.book 52 ページ 2005年7月25日 月曜日 午後4時24分