Intellitouch sbc-120 Anleitung Für Quick Setup

Use these one-touch buttons to store often dial phone numbers or Centrex system features. To store a 
number in a memory button:

1. Enter number using the dialing keypad.

2. Press and hold the 

[MEMORY 1 or 2] button until “SAVE OK” appears on the LCD.

Pressing the 

[MUTE] button turns off the telephones microphone so that the other party cannot 

hear you, but you can hear them. Pressing the 

[MUTE] button again restores connection to the 

microphone so the other party can again hear you. The LCD will display 

“MUTE” while the 

function is active.

You can store 70 numbers and names in the phone book, refer to the “FUNCTION OPERATIONS”, 

under the “PHONEBOOK” in the Owner’s Manual for details.v

To put a caller on hold, Press the [HOLD] button. The red light on the button will light up and the LCD will 
display “Holding” indicating that the call is on hold. To continue the conversation, just press the [HOLD] 
button again or press the hook switch once.
NOTE: In the HOLD mode, you can hang up the handset. To resume the conversation, just pick up the 
handset.

When you use this phone for the first time, or move to an area that has a different area code, you must 
enter your area code. This is necessary because the phone must distinguish local or long distance calls to 
properly dial calls from the Caller ID list and phonebook.

1. Press the [MENU] button, using the   or   scroll to SET AREA CODE - press [ENTER/DIAL] button.
2. LCD will Display “SET AREA CODE”.
3. Using the keypad dial buttons, enter your area code.
4. When the three-digit area code setting has been completed (for example: if your area code is 858 

the display will show ‘858’) then press [ENTER/DIAL]

5. Phone will return to main menu

If you have subscribed to Caller ID, the date and time will be automatically set when the first call is received. 
To set the time manually follow the instructions in the Owner’s Manual.

The Caller ID phone requires three 1.5V R6P SUM-3 SIZE AA batteries for LCD display.

1. Remove the battery cover from the back of your Caller ID phone.

2. Insert three 1.5V AA size batteries by observing the +/- polarity marked in the battery 

compartment.

3. Replace battery compartment cover.

Plug one end of the supplied telephone 
line cord into the line jack. Then plug 
the other end into telephone line jack. 
Plug in the AC power adapter into a 
power outlet and the plug the other 
end into 9VDC jack.