Edirol LVS-400 Zusätzliches Handbuch
5
About the New Functions
You can switch inputs using a combination of the A-BUS and B-BUS buttons 1–4 and
the video fader.
the video fader.
This switches the image selected with A-BUS with an image from a different input.
1
Tilt the video fader towards the A-BUS side.
The image corresponding to the lit (selected) A-BUS button is output from the
OUTPUT connector.
OUTPUT connector.
2
Select the image source you want to output with one of the A-BUS buttons 1–4.
The video switches to the selected image.
Switching the Input
Switching the A-BUS Image with Images from
Other Inputs
Other Inputs
Pressing the A-BUS or B-BUS
buttons while the video fader
is positioned midway between
A-BUS and B-BUS may disrupt
the image.
buttons while the video fader
is positioned midway between
A-BUS and B-BUS may disrupt
the image.
TRANSITION TIME
B-BUS
B-BUS
A-BUS
TRANSITION
EFFECTS
LEVEL
MIX
MODE
WIPE
EFFECTS
A-BUS
A / B MODE
1
2
Switching Images As They Play
You can switch images while they are being played by setting the transition time
with the TRANSITION TIME knob. 4.0 is the longest setting (4.0 seconds); when
set to 0.0, the images are switched instantly.
with the TRANSITION TIME knob. 4.0 is the longest setting (4.0 seconds); when
set to 0.0, the images are switched instantly.
The BUS buttons flash during
transitions and switching.
transitions and switching.
A
B
A
B
TRANSITION
TIME
LVS-400v2_e1.book 5 ページ ２００４年８月１０日 火曜日 午後５時７分