Savin is200e Installationsanweisungen
System Settings
59
3
To configure network boot
settings when you use this
machine on a DHCP environment
settings when you use this
machine on a DHCP environment
A Press [↓↓↓↓Next] three times at 2. IP
Address.
“5. Access Control” appears as
the setup item currently selected.
“5. Access Control” appears as
the setup item currently selected.
Note
❒ It is not necessary to specify
“2. IP Address”, “3. Subnet
Mask” and “4. Default Gate-
way Address”. The DHCP
server on your network as-
signs these values automati-
cally.
Mask” and “4. Default Gate-
way Address”. The DHCP
server on your network as-
signs these values automati-
cally.
B Specify each value for “5. Ac-
cess Control” and “7. Network
Boot”.
You can specify these values in
the same way that you have
done in steps
Boot”.
You can specify these values in
the same way that you have
done in steps
der p.57 “To configure network
boot and related settings when
a fixed IP address is assigned to
this machine”. When you are
finished, “7. Network Boot” ap-
pears as the setup item current-
ly selected.
boot and related settings when
a fixed IP address is assigned to
this machine”. When you are
finished, “7. Network Boot” ap-
pears as the setup item current-
ly selected.
Note
❒ When you want to set no lim-
itation of access to this ma-
chine, it is not necessary to
specify “5. Access Control”,
while you need to confirm
that “6. Access Mask” is set
to “000.000.000.000”.
chine, it is not necessary to
specify “5. Access Control”,
while you need to confirm
that “6. Access Mask” is set
to “000.000.000.000”.
C Press [Settings].
The setting screen for “7. Net-
work Boot” appears.
work Boot” appears.
D Use [↑↑↑↑] and [↓↓↓↓] to display “DH-
CP”.
Note
❒ “*” mark appears along with
the option currently selected.
E While “DHCP” is displayed,
press [OK].
This returns to the System Set-
tings menu.
This returns to the System Set-
tings menu.
Note
❒ Pressing [Cancel] leaves the
setting as it was (the option
marked with “*” remains ac-
tive), and returns to the pre-
vious screen.
marked with “*” remains ac-
tive), and returns to the pre-
vious screen.
GGGG
Press [
↓↓↓↓Next].
“8. Delivery Server IP Address”
appears as the setup item currently
selected.
appears as the setup item currently
selected.