Enterasys 2200 Betriebsanweisung

Port Filtering Configuration Screen

802.1Q VLAN Configuration Menu Screens

Refer to 

 for a functional description of each screen field.

To display the VLAN IDs and VLAN Names of the VLANs associated with a particular port, 
proceed as follows:

1. Use the arrow keys to highlight the Port field.

2. Use the SPACE bar or BACKSPACE key to step through the available port selections. The 

screen displays the Port VLAN List of the selected Port. If ALL is selected, no VLAN ID or 
VLAN Name information is displayed under Port VLAN List. 

VLAN ID 
(Read-Only)

See the VLAN ID of the VLANs that are configured to have their 
frames transmitted out of the port selected in the Port field.

VLAN Name 
(Read-Only)

See the names of the VLANs associated with the VLAN ID. If a VLAN 
does not have a name, “Not Defined” is displayed.

Port 
(Selectable)

Step to the port number of the interface being configured including the 
selection of ALL ports. 

Filter Using VLAN 
Lists 
(Toggle)

Filter out (drop) frames that are classified, via their VLAN tag, as 
belonging to a VLAN that is not on the Port VLAN List and prevent 
them from being forwarded by the switch.

This field toggles between YES and NO. YES enables filtering 
according to the Port VLAN List. NO allows the switch to forward the 
frames. The default is NO.

Filter All Untagged 
Frames 
(Toggle)

Filter out all incoming untagged frames so they will not be forwarded 
by the switch. This field toggles between YES and NO. YES enables 
the filtering of untagged frames. NO allows the switch to forward 
untagged frames. The default is NO.