Enterasys 2200 Betriebsanweisung
Built-in Commands
11-4
Network Tools Screens
11.2 BUILT-IN COMMANDS
The built-in commands listed in this section activate functions on the LM managed device or
devices being accessed through Network Tools.
devices being accessed through Network Tools.
arp
Description:
Provides access to the ARP (Address Resolution Protocol) cache, enabling
you to view cache data, delete entries, or add a static route. Super-user access
is required to delete an entry or add a static route.
you to view cache data, delete entries, or add a static route. Super-user access
is required to delete an entry or add a static route.
Each ARP cache entry lists the network interface that the device is connected
to, the device’s network address or IP address, the device’s physical address
or MAC address, and the media type of connection to the device. Media types
display as numbers, which stand for the following states:
to, the device’s network address or IP address, the device’s physical address
or MAC address, and the media type of connection to the device. Media types
display as numbers, which stand for the following states:
1 – Other
2 – Invalid entry (cannot ping device, timed out, etc.)
3 – Dynamic route entry
4 – Static route entry (not subject to change)
You must specify the arp command with one of the Options specified in this
table.
table.
Syntax:
arp<options>
Options:
-a –Views cache data
-d – Deletes an IP address entry. Requires additional arguments: [Interface
Number] [IP address]
-s – Adds a static entry. Requires additional arguments: [Interface Number] [IP
address] [MAC address]
-f – Flushes the ARP cache