Enterasys 2200 Betriebsanweisung
Example 7, Dynamic Egress and Aging Time
11-24
Network Tools Screens
11.3 EXAMPLE 7, DYNAMIC EGRESS AND AGING TIME
This section provides an example of how aging time affects the dynamic recognition of frames
from a user device on a port.
from a user device on a port.
In this example, assume that a rule set on Port 1 of the SmartSwitch device classifies all IP frames
to a Red VLAN. Once Port 1 receives a frame from a user device, the frame is classified to the
Red VLAN and added to the dynamic Port VLAN List of Port 1.
to a Red VLAN. Once Port 1 receives a frame from a user device, the frame is classified to the
Red VLAN and added to the dynamic Port VLAN List of Port 1.
If after 300 seconds another IP frame is not received on Port 1 (by any station), the Red VLAN is
removed from the dynamic Port VLAN List for Port 1. When Port 1 receives another frame, the
Red VLAN is added again to the dynamic Port VLAN List of Port 1 and the process continues.
removed from the dynamic Port VLAN List for Port 1. When Port 1 receives another frame, the
Red VLAN is added again to the dynamic Port VLAN List of Port 1 and the process continues.
Example:
(Continued)
(Continued)
NOTE: The following shows examples of when three, seven, and
32 characters are entered as the secret code (16 to 32 characters
are recommended).
32 characters are entered as the secret code (16 to 32 characters
are recommended).
-> radius sec_secret
Enter Secret (max 32): ***
Confirm Secret: ***
# ERROR : secret minimum length is 6
-> radius sec_secret
Enter Secret (max 32): *******
Confirm Secret: *******
Warning: rfc2865 recommends min length of 16
ok
-> radius sec_secret
Enter Secret (max 32): ********************************
Confirm Secret: ********************************
ok
radius (Continued)