Enterasys csx400 Benutzerhandbuch

138

CSX400 and CSX400-DC User’s Guide

The CSX400 is year 2000 compliant so that the System Date field can be set beyond the year 1999. 
To set the system date, perform the following steps:

Use the arrow keys to highlight the System Date field.

ENTER the date in an MM/DD/YY YY format.

Press ENTER to set the system date.

Use the arrow keys to highlight the SAVE command at the bottom of the screen and press 
ENTER.

If the date entered was a valid format, the Event Message field at the top of the screen displays 
“SAVED OK”. If the entry was not valid, Local Management does not alter the current value and 
refreshes the System Date field with the previous value.

To set the system time, perform the following steps:

Use the arrow keys to highlight the System Time field.

ENTER the time in a 24-hour format, HH:MM:SS.

Press ENTER to set the system time.

Use the arrow keys to highlight the SAVE command field at the bottom of the screen and press 
ENTER. If the time entered was a valid format, the Event Message field at the top of the screen 
displays “SAVED OK”. If the entry was not valid, Local Management does not alter the current 
value and refreshes the System Time field with the previous value.

When entering the date in the system date field, you do not need to add separators 
between month, day, and year numbers, as long as each entry uses two decimal 
numbers. For example, to set the date to 03/17/1997, type “03171997” in the System 
Date field.

When entering the time in the system time field, you do not need to add separators 
between hours, minutes, and seconds, as long as each entry uses two decimal 
numbers. For example, to set the time to 6:45 a.m., type “064500” in the System Time 
field.